What Should Be Paid Attention To In The Maintenance And Repair Of Industrial Transfer Cars Motor?

In order to ensure the normal operation of the equipment, the industrial transfer car motor should be overhauled on time, usually once every three months. If the motor winding is burnt out due to the accident, it should be disassembled in time to analyze the cause.

During the operation of industrial transfer cart motor, it is necessary to check the skills of various parts on time, and timely clean up the dust, water, oil and iron filings that can enter the machine body, and adopt prevention and control methods.

The air duct of transfer cart motor must be unobstructed, and no heat source should be placed around the motor. If problems are found, preventive measures should be taken in time. It is necessary to pay attention to abnormal dynamic state of bearing, overheated oil leakage and excessive axial and radial shaking. If any problem is found, the damaged bearing should be exchanged in time.

Under normal conditions, the motor of electric transfer car shall exchange grease once every six months. When exchanging grease, first clean the bearing with kerosene or gasoline, and then fill two thirds of the bearing chamber with grease. In this way, the waste can be avoided and the damage to the equipment caused by friction can be reduced.