Do You Know How To Maintain Rail Transfer Carts?These 5 Pieces Of Information Tell You

In the course of daily use of electric rail transfer carts, if you do not pay attention to daily maintenance, some problems will occur.Therefore, electric rail transfer carts must do the following daily maintenance work in daily use.

1.Inspect the electric rail transfer cart.
Drive system: the motor, coupling, and reducer (reducer) are not loose and operate normally.The gear box (gear box) has sufficient oil, the oil quality meets the requirements, and there is no dust.The activation effect of the brake pads is good, and the contact of the brake wheels is accurate and there is no serious wear.The grinding wheel is precise and the rolling is excellent.
Frame: The body is not deformed, the countertop is flat, there are no pits, and the whole rail transfer cart is neat and tidy.
Electronic part: The contacts of the slide line and the skateboard (cable) are excellent, the movement is flexible, and the cable frame is strong and defect-free (or the battery is fully charged).The electrical switch is flexible and easy to operate.The alarm light is loud.All parts of the electrical appliances are well insulated.
Others are: complete maintenance data and clean.The machinery and equipment are intact.

2.For battery-powered level rail transfer carts, when the battery is low, the battery should be unplugged in time, charged as required, and replaced with a spare battery for work.Someone must be responsible for battery replacement and charging operations.The power must be unloaded and cut off during work, and cleaned in accordance with regulations.

3.It is forbidden to use equipment that exceeds standards or is overloaded.When carrying heavy cargo, it must be placed smoothly and lightly to ensure that the weight is evenly dispersed and focusing is prohibited.

4.Always check the working conditions of various departments. If the temperature of the motor and bearing rises or abnormal sounds are found, they should stop immediately for inspection.Don't drive a level rail transfer cart to top, hit, drag, or pull rail transfer carts on the railway.The operator shall not leave or entrust others to take care of the activated device.

5.Before starting the equipment, you must first report a signal to check that the direction of movement is unattended and there are no obstacles in order to start, start and stop smoothly, and it is forbidden to bump into the end point.When the start switch cannot move around, it should be checked in time to avoid burning out the motor or causing other accidents.When changing the direction of movement, you must wait until the movement is completely stopped before proceeding in the opposite direction.