Why Does The Electric Transport Cart Make So Much Noise When In Use?

The electric transport cart is a rail-type transportation vehicle. The electric transport cart can not only be used for material transportation and transfer within the factory, but can also transport goods over short distances between factories. During the transportation of the equipment, noise is often made due to the conflict between the wheels and the tracks. If the noise is too loud, it means there is a problem with a certain component of the equipment.
In order to facilitate the handling of this problem, the following analyzes several causes and solutions for excessive noise.

1. Reasons for the reducer: first shut down the machine and check whether there is still wheel lubrication oil at the internal touch points of the electric transport cart. If the oil is missing or black, it needs to be replaced or refueled. If this situation remains for a long time, excessive wear or damage to the gears and tooth surfaces will occur. .
2. Reasons for the electric control box: The noise is usually dominated by current sound. If the current connector is defective or some of the contact parts are aging, the contact needs to be re-strengthened or replaced to eliminate the noise.
3. Reasons for the electric gear: Stop the machine immediately and check whether the gear operation is normal or whether the outer surface of the gear is damaged, whether the central axis violates the position, etc. These will cause the gear to make abnormal noises. Different faults produce different noises. When the gear operation is abnormal, the noise of the entire gear is dull, and when the tooth surface is damaged, the noise is crisper. When the central axis is out of position, the noise appears obvious and intermittent, and is accompanied by sharp sounds from time to time. Please stop using the electric transport cart when the gear defect is not resolved.