- 202016-10
What Is The Brushless DC Motor Of Transfer Carts?
Different from the brushless DC motor, brushless DC motor does not use mechanical brush device. It adopts square wave automatic control permanent magnet synchronous motor, uses Hall sensor to replace carbon brush commutator, and uses NdFeB as rotor permanent magnet material. Compared with conventional DC motor, brushless DC motor has great advantages in performance. It is the most ideal speed regulating motor and is commonly used in transfer carts and other equipment. The essence of Brushless DC motor is a permanent magnet synchronous motor with position feedback, which uses DC power input and inverter to change into three-phase AC power supply_sun
- 092016-10
Steel Plant Transfer Trolley To Be Delivered
There are 2 sets steel plant transfer trolley will delivery to our customer's factory. This kind of transfer trolley is a rail type transfer tolley with a large load capacity. It is used to transport the steel workpieces from one bay to another in the workshop_sun
- 252016-09
What Should Be Paid Attention To When Using Rail Guided Powe...
KPD series rail guided power trolleys are divided into two-phase power supply and three-phase power supply. When the power is on, the voltage is mainly reduced to 36V by the ground cabinet, and then the electricity is transmitted to the conductive track, and then the electricity is transmitted to the step-up transformer through the on-board conductor and friction slider, and finally reaches the on-board electric control cabinet equipment after the voltage rises_sun
- 192016-09
Main Components Of Rail Mounted Transfer Cart
The rail mounted transfer cart is an electric powered material handling tool applied in the workshop for material transport. The electric control system of electric rail transfer cart is mainly composed of control switch, voltage converter, warning lamp and conductive transmission device. Its main function is to provide the voltage needed for the operation of rail mounted cart and ensure its safety. The electric flat car mainly consists of transmission control device, electric control device, wheel and frame._sun
- 092016-09
FAQ For Industrial Transfer Car On Rail
The industrial transfer car on rail is an electric powered material handling equipment widely applied in the industrial fields. The followings are the FAQ about the industrial application transfer cars._sun
- 112016-08
What Is Crane Wheel?
The crane wheels are the most important parts in traveling unit and also are the most vulnerable parts due to the strong impact and wear between wheel and rail. Flange wear, flange breakage and fatigue pitting are the frequently encountered problems. When the crane travelling wheels are broken, the repair and replacement are complex and very time-consuming_sun
- 022016-05
Special Power Taking Device For Rail Powered Transfer Cart
The power taking device is the core part of KPD and KPDS series rail powered transfer cart. It feeds the low-voltage electricity to the step-up transformer on the car body through the power grinding block, and then the step-up transformer increases the low voltage to the rated voltage and supplies it to the driving motor of the rail power flat cart. The existing power taking device is mainly composed of a guide frame, a guide post, an insulating plate and a grinding block. The guide frame is fixed on the cart body through the insulating plate, the guide post is placed in the vertical chute of the guide frame, the grinding block is pressed on the conductive rail and fixed at the lower end of the guide post through the grinding block base plate, and the guide post and the conductive rail form a 90 degree angle. The disadvantage of this kind of power taking device is that when there are foreign matters on the conductor rail, weld of the guide rail, or the surface of the conductor rail is uneven due to deformation, wear and other reasons, the convex part is very easy to collide with the power grinding block, so that the guide frame or guide pillar is deformed, and even the power taking device is damaged or scrapped, which greatly reduces the operation reliability of the power taking device_sun
- 092016-04
Application Of Large Tonnage Mold Transfer Cart
Metal pipe fittings usually need to carry out flaw detection, shot blasting, painting, drying and other processes. However, the mold transfer cart has its own power supply, no fixed route, small turning radius, and relevant protection for electrical parts. The mold transport cart can transfer freely between different processing workshops and storage warehouses, greatly improving work efficiency_sun
- 292016-03
Steerable Transfer Cart To Be Delivered
The steerable transfer cart will delivery to our customer's factory. This kind of trasnfer cart uses PU wheels, adopt battery power, DC motor drives, large capacity, stable start, do not rely on rail, tow-way travel. Hydraulic steering mechanism ensures tight turning radius, enabling 360° turn in a small space. The table size of this steerable transfer carts can be customized as per demands. For more details about the steerable transfer carts, please contact us._sun
- 232016-02
How To Install The Wireless Handle On Rail Electric Transfer...
In order to make the operation of the rail electric transfer car more convenient, some customers require that the electric flat transfre car be equipped with a wireless handle, that is, a wireless remote control handle, which can realize the remote wireless control of the rail electric transfer car without coil interference. So, how to install the wireless handle? Wireless control handle: it is mainly composed of wireless transmitting device and wireless receiving device. When purchasing, the products of regular manufacturers should be used. Cottage products will lead to receiving insensitivity or failure, and the installation will begin after purchasing_sun
- 212016-02
Electric Transfer Cart - Automated Material Handling System
The electric transfer cart is a kind of automated material handling equipment which can replace manual, forklift and ground rail turntable. The trackless electric transfer cart can automatically transport objects of different tonnage to places with narrow space and path in different sites and environments. It can freely shuttle in various sites and environments. At present, it is mainly used for the transfer of materials such as various molds, workpieces and equipment. It can also be used for various stereoscopic warehouses with automatic procedures. Trackless transfer cart is mainly composed of cart body, driving system (composed of battery, motor and reducer), electrical system, steering wheel or mcnamm wheel and safety detection system. It is mainly used to carry goods_sun
- 032016-02
Working Principle Of Circuit Breaker For Conductor Rail Tran...
The conductor rail transfer cart circuit breaker can be used to distribute electric energy, start asynchronous motor infrequently, protect power line and motor, and cut off the circuit automatically in case of serious overload, short circuit, undervoltage and other faults. Its function is equivalent to the combination of fuse switch and overheating relay. And it is not necessary to change the parts after breaking the fault current. A circuit breaker is an electrical panel used in electrical equipment to monitor and control the amount of amperes (Amperes) that are sent through electrical wiring._sun
